EasyManuals Logo

Echo CS-355T User Manual

Echo CS-355T
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background image
CS-355T OPERATION
X7503323507 25
© 01/2021 ECHO Incorporated
4. Tighten nuts with the bar nose
held up.
5. Pull the chain around the bar by
hand. Loosen the adjustment if
you feel tight spots.
Tighten guide bar nuts to 20-23 N•m (200 to 230 kgf•cm,
175-200 lbf•in.). DO NOT over-tighten nuts. Damage to saw may
result.
6. Assemble components in reverse order.
7. Keep chain properly tensioned at all times.
Note: All chains require frequent adjustments.
OPERATION
Fuel
Diesel fuels and alternative fuels, such as E-15 (15% ethanol), E-
85 (85% ethanol) or any fuels not meeting ECHO requirements
are NOT approved for use in ECHO 2-stroke gasoline engines.
Use of diesel or alternative fuels can cause performance
problems, loss of power, overheating, fuel vapor lock, and
unintended machine operation, including, but not limited to,
improper clutch engagement. Diesel or alternative fuels can
also cause premature deterioration of fuel lines, gaskets,
carburetors and other engine components.

Other manuals for Echo CS-355T

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo CS-355T and is the answer not in the manual?

Echo CS-355T Specifications

General IconGeneral
Engine Displacement35.8 cc
Engine Type2-stroke
Bar Length14 inches
Chain Pitch3/8 inch
Chain Gauge0.050 inches

Related product manuals