OPERATION PB-580H/T
24 X7505200705
© 12/2017 ECHO Inc.
Note: Never use a higher speed setting than necessary to perform a
task. Remember, the higher the engine speed, the louder the
blower noise.
9. Minimize dust by using blower at lower speeds or dampen surface with
water. Blower can be used to clean most surfaces when water
conservation is desired.
10. Use the full blower pipe configuration when blowing.
11. After using blowers and other equipment, CLEAN UP! Dispose of
debris in trash receptacles.
Contacting blower pipe tip on abrasive surfaces can create
sharp cutting edges and can result in personal injury if touched.
Do not scrape or drag blower pipe tip when operating or
transporting unit. Replace blower pipe assembly if protective
metal ring is worn, cracked or deformed.
Cold Weather Operation
Plug
For operation in cold weather, install
plug in cold weather position (C),
otherwise icing can occur.
For operation in normal weather,
install plug in warm weather position
(D), otherwise over heating can
occur.
Intake Cover (optional)
In cold weather, intake cover can be
installed for operator comfort. Intake
cover is not included.
To Next Page
Loading...
Need help?
General
