POWER PRUNER
TM
OPERATOR'S MANUAL
7
EMISSION CONTROL
EPA Phase 2
The emission control system for these engines is EM (Engine Modification).
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 3EHXS.0214EA DISPLACEMENT: 21.2cc
EMISSION COMPLIANCE PERIOD : 300 HRS.
THIS ENGINE MEETS U.S. EPA PH 2 EMISSION REGULATIONS
FOR SMALL NONROAD ENGINES. REFER TO OWNER'S
MANUAL FOR MAINTENANCE SPECIFICATIONS AND
ADJUSTMENTS.
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures
are followed as listed in the Maintenance Section of this manual.
DESCRIPTION
Due to packaging restriction the ECHO product you have purchased requires some assembly.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
CONTENTS LIST
__ Power Head/Drive Shaft Assembly
__ Cutting Attachment
__ Operator's Manual
__ Safety Manual
__ Warranty Registration Card
__ Warranty Statement
__ 1, T-Wrench (Combination screwdriver/spark plug socket)
__ 1, 3 mm Hex Wrench
__ Safety Glasses
__ Echo Power Blend
TM
2-stroke oil sample
__ Shoulder Harness
__ Guide Bar Cover
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY, information on label varies by engine
FAMILY).
To Next Page
Loading...
Need help?
General