PPT-2620 OPERATION
X7507820600 27
© 2/2017 ECHO Inc.
ENGLISH
Note: Very little visible oil on the saw chain will provide sufficient lubrication.
Starting Cold Engine
The attachment will operate
immediately when the
engine starts, and could
result in possible serious
injury. Keep movable parts
of the attachment away
from objects that could
become entangled or
thrown, and surfaces that
could cause loss of control.
1. Stop Switch
Move stop switch button (A)
forward, away from the
STOP position.
2. Choke
Move choke lever (B) to
COLD START ( )
position.
3. Purge Bulb
Pump purge bulb (C) until
fuel is visible and flows freely
in the clear fuel tank return
line. Pump bulb an
additional 4 or 5 times.
To Next Page
Loading...
Need help?
General
