Echo PPT-2620 User Manual

MAINTENANCE PPT-2620
42 X7507820600
© 2/2017 ECHO Inc.
When carburetor adjustment is completed, the cutting
attachment should not move at idle, otherwise serious personal
injury may result.
Lubrication
Flexible Drive Shaft
Level 1.
1. Loosen clamping screws (A)
on driveshaft coupling.
2. Remove handle and flexible
drive shaft.
3. Remove flexible drive shaft
(B).
4. Wipe flex shaft clean and
apply a thin coating of
grease.
5. Slide flex shaft into handle.
Leave 2–3 inches of flex
shaft exposed. DO NOT get
dirt on flex shaft.
6. Align flexible drive shaft with
drive shaft socket, and slide
together until handle is fully
seated into drive shaft
coupling.
7. Tighten clamping screws
(A).
Parts Required: Lithium Based Grease
A
B
B

Echo PPT-2620 Specifications

General

Engine Displacement	25.4 cc
Engine Type	2-Stroke
Power Source	Gasoline
Bar Length	12 inches
Chain Gauge	0.05 inches