PPT-2620 OPERATION
X7507820600 29
© 2/2017 ECHO Inc.
ENGLISH
Note: If attachment moves,
readjust carburetor
according to
“Carburetor
Adjustment”
instructions in this
manual or see your
ECHO Dealer.
1. Stop Switch
Move stop switch button (A)
forward away from the STOP
position.
2. Purge Bulb
Pump purge bulb (C) until
fuel is visible in the “Clear”
fuel return line. Pump bulb
an additional 4 or 5 times.
3. Recoil Starter
Lay the unit on a flat area
and keep movable
attachment parts clear of all
obstacles. Firmly grip
throttle handle and throttle
trigger lockout with left hand.
Rapidly pull recoil starter
handle/rope (D) until engine
fires.
Note: If engine does not
start after 5 pulls, use
Cold Start Procedure.
To Next Page
Loading...
Need help?
General
