GRASS TRIMMER/BRUSH CUTTER
OPERATOR'S MANUAL
5
INTERNATIONAL SYMBOLS
EQUIPMENT
Before operation a complete check of the unit must be performed;
• Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
• Inspect fuel lines, tank and area around carburetor for fuel leaks. DO
NOT operate unit if leaks are found.
• Inspect shield for damage and ensure that the cut-off knife issecurely
in place. Replace if either is damaged or missing.
• Check that the cutting attachment is firmly attached and in safe
operating condition.
• Check that front (loop) handle and shoulder strap/or shoulder/
waist harness are adjusted for safe, comfortable operation. See
Assembly Section for proper adjustment.
Symbol
description/application
Symbol form/shape
Symbol
description/application
Symbol form/shape
Hot
Surface
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Symbol
description/application
Symbol form/shape
Symbol
description/application
Symbol form/shape
"WARNING, SEE
OPERATOR'S
MANUAL
Wear eyes, ears and
head protection
Emergency stop
Fuel and oil mixture
Finger Severing
Carburetor adjustment
- Low speed mixture
Primer Bulb
Ignition
ON/OFF
Wear hand and
foot protection
Safety/Alert
Keep bystanders and helpers
away 15 m (50 ft.).
Blade and string
line capable
Do not exceed
10,000 RPM.
Do not operate
without guards
and shields in
place.
BEWARE
- Thrown,
Ricochet
objects
DO NOT smoke
near fuel.
DO NOT allow
flames or sparks
near fuel.
Engine choke
control.
To Next Page
Loading...
