2
1-2. HANDLING OF CABLE
● Do not install the unit where rain or spray dashes hit directly.
It causes the firing and electronic shock.
● Do not install the unit at heated places.
It causes the firing from the increase of internal temperature,
injury, and electronic shock.
● Away from direct sun light.
It causes the difficulty of future vision and heat problem.
● Be sure to use the specified power supply cable.
It causes firing and heating.
● Do not leave the power plug after its removal.
It causes firing and heating if the plug gets wet.
● Be sure to wire the cables in order for safety pilot.
The improper wiring causes the accident.
※Do not put the heavy object on cables or bend cables excessively.
● Do not disassemble or modify the cables.
It causes to firing, heating, or electronic shock.
● Do not use damaged cables.
It causes firing or electronic shock.
● Do not pull out the cable when disconnecting the plug.
The cable damage causes firing and electronic shock.
※Be sure to hold and pull the plug itself for the removal.
● Do not put any pressures on cables when installing the unit.
It causes line cut and shortage.
To Next Page
Loading...