3
1-3. HANDLING OF TRANSDUCER AND WATER TEMP SENSOR
● Any works on the boat are very unstable and risky.
Installation/maintenance of transducer and water temp sensor should
be handled after landing the vessel on ground or fixing the vessel at
shipyard etc.
● Be sure to ventilate well inside the vessel when installing the
transducer at the bottom of vessel.
Volatile gas from solvent etc causes the toxic symptoms.
● Water proof treatment is required for Thru-Hull installation.
If not, it causes the marine accident.
※It
is not allowed for aluminum vessels due to the risk of corrosion.
● Do not operate the electronic tools with wet hands.
It causes electronic shock.
● Do not remove the transducer plug when the power is ON.
It causes electronic shock.
● Only use with selected transducers and water temp sensors.
The use of wrong parts may cause the damage on the unit.
1-4. TFT LCD PANEL
● TFT LCD panel is made with high precision technology. Therefore, the
effective pixel is over 99％, and pixel loss and continuous lighting pixel exist
0.01％ or more. Please understand the specifications.
To Next Page
Loading...