EN 21
Battery Replacement
Coin
3V Battery
CR2032
Speed (RPM ) Transmitter Battery Change
Main unit battery change
1. Replace the battery with a new battery within
a few days when the symbol appears." "
2. Replace with a new CR2032 battery and
initiate the main unit.
Speed and RPM transmitter Battery
change
1. The patent-pending transmitter circuit is
designed to reduce power consumption,
please use a 3V battery for transmitter
(generally a CR2032).
2. Replace a new battery when the
transmitter’s battery power is nearly
exhausted, otherwise the transmission
power will be very weak and unstable data
display will occur.
3. Replace a new CR2032 battery with the
positive (+) pole toward the sensor cap .
Check battery power status in
BATT icon.
Please change battery if the empty
battery symbols show up, low
power will result in stopping data
record.
3V Battery
CR2032
To Next Page
Loading...
