Echowell Ui 35 - Button Function Description; Data Setting Mode; General Mode; Other Modes

EN 02
Button function description
ALL CLEAR : A+B+C hold 3's (then automatically warm-up)
Enter fast pairing : A+B+C (in warm-up mode)
Enter clear eeprom :A+B+C hold 1's (in warm-up mode)
(3). Lap mode:
A Button : Press for start/stop Lap function
B Button : Press for change to next Lap
C Button : Press for enter Lap review mode
(4). Lap review mode:
A Button : Press for change Lap No.
B Button : Press for change Lap data
C Button :
Press for to back general mode
A + B Button : Hold 3's for reset lap data
(5). When under maintenance mode :
A + B Button : Hold 3's for reset reminder
to default value
D
C
A B
(1). Data setting mode:
A Button : Press for increase setting
digital ,hold 1's for auto
increase
B Button : Press for change setting digital
C Button : Press for enter next date
setting mode
D Button : Press for quit date setting
mode
(2). General mode:
A Button : Press for change function
Group hold 1’s for change
screen display
B Button : Press for change function
mode
C Button : Press for enter Lap and Lap
review mode ( for Ui35 only )
: Hold 3's for turn on RF power
(mount on bracket)
D Button : Press for enter data setting
mode
A + B Button : Hold 3's for data reset