27
Basic
operation
Touch , , or to
select a Q curve.
• The Q curve patterns set the median
frequency bandwidth as follows:
Repeat steps through to
change the setting for each band.
• It is not possible to set more than one
band in the same channel to the same
median frequency.
Touch the switch you want to use to
save ( to ) until you hear
a beep.
• Save the PEQ settings for future use.
• Touch
after making settings.
The PEQ mode adjustment will be
saved and the system will return to the
previous operation screen.
Switch Q curve pattern
Wide
Normal
Narrow
Q1 Q2 Q3
Q1
Q2
Q3
EQ1 EQ5
BACK
• If you touch and hold or during fine adjustment, the frequency level will
continue to adjust automatically until it reaches the centre value (0). Touch
or again to continue adjustment.
• Touch to return to the centre value (0).
FLAT
To Next Page
Loading...
Need help?
General
