Eclipse AVN6000 - Setting the Sub-Woofer; Selecting Phase Control; Selecting the Sub-Woofer Level

33
Basic
operation
Setting the sub-woofer
When a sub-woofer is connected, the preferred output level for the audio can be set.
Press .
Touch on the
INFORMATION screen.
Touch .
Touch in the setting
screen.
The merging of sound between the front and rear speakers and the sub-woofer can be
improved by selecting the phase.
Switch to a phase which lets the speakers combine without any disharmony.
Touch or
for PHASE CONTROL.
• Touch after making settings.
The phase control will be saved and
the system will return to the previous
screen.
The output level of the sub-woofer can be adjusted with this function.
Touch or for WOOFER
LEVEL.
: Increase level
: Decrease level
• Touch after making settings.
The woofer level will be saved and the
system will return to the previous
screen.
INFO
SETTING
NEXT
WOOFER
Selecting phase control
NORMAL REVERSE
BACK
Selecting the sub-woofer level
BACK