38
Basic operation
Adjusting the background screen
Setting the opening screen
The image displayed on the opening screen (which is displayed when the power is turned
on) can be changed to your favorite one stored in a CD-R/RW.
Insert a CD-R/RW disc that includes your favorite image.
• It would take approximately 30 seconds to read the image data. While the image
data is being read, do not operate the main unit and the ignition key.
Touch .
Touch the image you want to display on the opening screen.
Touch .
• Be sure to eject the CD-R/RW disc that includes the image data.
The format of disc and image data that can be used on the opening screen are shown in the
table below. If your disc and/or data does not meet the conditions below, the file names may
not be listed nor displayed correctly.
*When storing the image data in a CD-R/RW disc, make a text file named "CSM.txt" (any
content/text is OK) and store it together with the image data.
• If the image size is larger than the condition above, the image cannot be previewed or
imported.
• If the image size is smaller than the condition above, the image will be displayed at the
centre of screen.
• Only one image data can be imported at a time.
CD-R/RW
Disc format ISO9660 (MODE1)
File size Smaller than 100 KB
File name ISO9660 LEVEL 2 (Up to 31 bytes)
File extension .jpg (Non-JPEG2000-compliant)
Writing method Single-session only
Image size 416 (W) X 240 (H) dots (Max.)
Displayed file
The files in the root directory (top-most directory) only.
Changing the image on the opening screen
Opening Image Change
OK
About usable image data
To Next Page
Loading...
Need help?
General
