29
Basic
operation
Setting POS (position selector)
The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-left volume balance can be adjusted for the selected
position.
Touching the image of a seat
shown on the setting screen
will change the position.
• The selected position will change its
colour to orange. Touching the seat
again will cancell the selection. The
four positions shown by the table
below can be set.
• Touching will cancell all
settings.
• After making settings, touch . The position will be saved and the system will
return to the previous operation screen.
Touch switch Function Touch switch Function
Acoustics optimised for
driver's seat
Acoustics optimised for
both front seats
Acoustics optimised for
passenger's seat
Acoustics optimised for
rear seats
POS
OFF
BACK
• This setting cannot be done at the same time as adjustment of the volume
balance (see next page) and the Circle Surround II (Page 36).
• The main unit is configured for vehicles with a left-side driver's position.
To Next Page
Loading...
Need help?
General
