Eclipse CD5030 Reference Guide

28
English
How to operate the AUDIO CONTROL
1
Press the [ENTER] button for less
than one second.
The Audio Control mode is activated.
Switching audio control modes
Various audio control modes may be fine-tuned
using this procedure.
Mode Function
Rotary Mode
Left Right
BALANCE
Adjusts the audio balance of
the right and left speakers
Emphasizes the
left speakers.
Emphasizes the
right speakers.
FADER
Adjusts the audio balance of
the front and rear speakers
Emphasizes rear
speakers.
Emphasizes front
speakers.
NON-F (NON-
FADER LEVEL)
Adjusts non-fader level (for
subwoofer).
Decrease the
subwoofer level.
Increase the
subwoofer level.
LOUDNESS
The loudness control may
be turned on to emphasize
low and high frequencies
at low volume levels.
Loudness boosts bass and
treble at low volumes.
Select OFF Select ON
SVC (Source
Volume Control)
Adjusts different volume
levels for each audio mode.
Decrease level. Increase level.
2
Press the [ENTER] button to select
the item to be adjusted.
Theitemswillswitch in theorder shown
beloweachtimethebuttonispressed.
*1: Setting cannot be made in FM mode.
*1
3
Turn the [VOL] knob to adjust the
volume.

Eclipse CD5030 Specifications

General

Brand	Eclipse
Model	CD5030
Category	Car Receiver
Language	English