Eclipse EGO User Manual

Quick Set-UpQuick Set-Up
Quick Set-Up
Quick Set-Up
Quick Set-Up
At the rear of the frame, are three recessed
pushbuttons. Press and hold the centre pushbutton
(See Figure 2.3) . After one second the Eclipse Ego logo
will be displayed. Release the pushbutton and the
display will revert to the designated run screen (Rate of
Fire, Shot Counter or Game Timer).
Press and hold the centre pushbutton for 1 second. The
display will read OFF . Release the centre pushbutton and
re-press it to turn off the Eclipse Ego. Alternatively when
the display reads OFF , you can also pull the trigger once
to turn off the Eclipse Ego.
Pull the trigger to fire the Eclipse Ego. The entire firing
sequence is controlled electronically by the Eclipse Ego
circuit board and solenoid, enabling any user to achieve
high rates of fire easily.
Switching On the Eclipse Ego
Switching Off the Eclipse Ego
Firing the Eclipse Ego
FIGURE 2.3
Quick Set-Up
Quick Set-Up
14
15

Eclipse EGO Specifications

General

Air Source	HPA (High Pressure Air)
Body Material	Aluminum
Manufacturer	Planet Eclipse
Type	Electronic
Bore Size	0.689 inches
Barrel Length	14 inches
Battery	9V
Grip Material	Rubber
Color Options	Various