Advanced Set-Up
First Shot Drop Off
First shot drop off is a reduction in velocity of
the first paintball to be fired after the Ego has
been left un-fired for any length of time. The
FSDO
parameter is used to define an increase
in dwell time for the 'First Shot' in order to
combat this problem.
Scroll through the
Timing
Menu until the
FSDO
parameter is displayed.
The current value of the
First Shot Drop Off
is
shown on the right hand side of the display
(See Figure 4.10)
Press the
Select
pushbutton to
enter the edit
function and the edit indicators will appear on
the display.
Press and release the
Raise
pushbutton to
increase the
FSDO
value in 0.1ms increments.
Press and hold the
Raise
pushbutton to
increase the
FSDO
value more rapidly.
Press and release the
Lower
pushbutton to
decrease the
FSDO
value in 0.1ms increments.
Press and hold the
Lower
pushbutton to
decrease the
FSDO
value more rapidly.
Press
Select
to save the
FSDO
value
and the
edit indicators will disappear from the display to
indicate that the value has been accepted.
You have now returned to the
Timing
Menu.
The
FILTER
Menu provides access to parameters that are used
to control the various software filters.
Scroll through the
Set-up
Menu until the
FILTER
is displayed
and then press Select. This will display
EMPTY
, the first item
on the
Filter
Menu
(See Figure 4.11)
Press the
Lower
pushbutton to scroll down through each of
the items on the
Filter
Menu. Once the last item has been
displayed, pressing the
Lower
pushbutton will cause the first
item to be displayed.
Press the
Raise
pushbutton to scroll up through each of
the items on the
Filter
Menu. Once the first item has been
displayed, pressing the
Raise
pushbutton will cause the last
item to be displayed.
Press the
Select
pushbutton to edit the displayed parameter.
Selecting
BACK
will return the display to the
SET-UP
Menu.
FIGURE 4.10
FIGURE 4.11
The Filter Menu
Advanced Set-Up
Advanced Set-Up
32
33
To Next Page
Loading...
Need help?
General
