To Next Page

To Previous Page

Advanced Set-Up

Maximum Rate of Fire

The

MAX ROF

parameter is used to control how

fast the Ego cycles when the Break Beam Sensor

System is disabled. This parameter should be set

to match the slowest speed of the loading system

in use.

Scroll through the

Timing

Menu until the

MAX ROF

parameter is displayed.

The current value of the

Maximum Rate of Fire

shown in balls per second on the right hand side of

the display. Press the

Select

pushbutton to enter the

edit function

(See Figure 4.8)

Press and release the

Raise

pushbutton to increase

the

MAX ROF

value in 1 ball per second increments.

Up to a maximum of 30 bps. Press and hold the

Raise

pushbutton to increase the

MAX ROF

value more

rapidly.

Press and release the

Lower

pushbutton to decrease

the

MAX ROF

value in 1 ball per second increments.

Down to a minimum of 1 bps.Press and hold the

Lower

pushbutton to decrease the

MAX ROF

value

more rapidly.

Press

Select

to save the

MAX ROF

value and the edit

indicators will disappear from the display to indicate

that the value has been accepted. You have now

returned to the

Timing

Menu.

Dwell

The Dwell parameter controls the amount of time

that the solenoid is energised and therefore the

amount of gas that is released with each shot.

Scroll through the

Timing

Menu until the

DWELL

parameter is displayed.

The current value of the

DWELL

is shown on the right

hand side of the display

(See Figure 4.9)

Press the

Select

pushbutton to enter the edit

function and the edit

indicators will appear on the

display.

Press and release the

Raise

pushbutton to increase

the

DWELL

time in 0.1 millisecond increments. Press

and hold the

Raise

pushbutton to increase the

DWELL

time more rapidly.

Press and release the

Lower

pushbutton to decrease

the

DWELL

time in 0.1 millisecond increments. Press

and hold the

Lower

pushbutton to decrease the

DWELL

time more rapidly.

Press

Select

to save the

DWELL

time and the edit

indicators will disappear from the display to indicate

that the value has been accepted. You have now

returned to the

Timing

Menu.

FIGURE 4.8

FIGURE 4.9

Edit Indicators

Advanced Set-UpAdvanced Set-Up

Advanced Set-Up

Air Source	HPA (High Pressure Air)
Body Material	Aluminum
Manufacturer	Planet Eclipse
Type	Electronic
Bore Size	0.689 inches
Barrel Length	14 inches
Battery	9V
Grip Material	Rubber
Color Options	Various

Eclipse EGO User Manual

Table of Contents

Questions and Answers:

Eclipse EGO Specifications

Related product manuals