Advanced Set-Up
The Factory settings menu gives the user a simple way
of resetting their Eclipse Ego to the factory settings,
without having to individually go through and adjust
each parameter.
If the user has chosen to deviate from the factory
settings,
FACTORY NO
will be displayed when entering the
FACTORY
Menu
(See Figure 4.17)
Press the
Lower
pushbutton to scroll down through each
of the options on the
Factory
Menu. Once the last option
has been displayed, pressing the
Lower
pushbutton will
cause the first option to be displayed.
Press the
Raise
pushbutton to scroll up through each of
the options on the
Factory
Menu. Once the first option
has been displayed, pressing the
Raise
pushbutton will
cause the last option to be displayed.
Press the
Select
pushbutton to select the displayed
option.
To reset the Eclipse Ego to Factory Settings, select the
YES
option.
To keep the Eclipse Ego settings the same, select the
NO
option.
It is not possible to select
CUSTOM
as an option from the
FACTORY
Menu, as this is only displayed when Factory
Settings are not adhered to.
Selecting
CANCEL
will terminate the selection mode
leaving the original choice unchanged and return you to
the
Set-up
Menu.
(See Figure 4.18)
Scroll through the
Set-up
Menu until the
FACTORY
parameter is displayed and then press the
Select
pushbutton to enter the
FACTORY
menu
(See Figure 4.18)
FIGURE 4.18
FIGURE 4.17
The Factory Setting Menu
Using the Factory Menu
Display Menu Tree
Display Menu Tree
38
39
To Next Page
Loading...
Need help?
General
