EasyManuals Logo

Eclipse EGO User Manual

Eclipse EGO
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
Fault FindingFault Finding
Fault Finding
Fault Finding
Fault Finding
Symptom Possible Cause Solution
Although a fresh battery has been fitted,
the Eclipse Ego will not switch on.
The battery has been fitted incorrectly.
Fit the battery correctly with the positive
terminal nearest to the side of the frame.
The battery terminals are not making
proper contact with the battery.
Remove the battery, gently bend the
terminals towards where the battery will
sit and then replace the battery.
The battery does not seem to last very
long.
The battery type is of a low quality. Use an alkaline or metal hydride battery.
Do not use a low quality or rechargeable
battery.
Eclipse Ego leaks from solenoid area. Check that 3 solenoid seals are intact
and seated correctly in their designated
pockets in the minifold.
Replace seals is damaged using Eclipse
Ego parts kits. Ensure seals are seated
correctly.
Damaged Eclipse Ego solenoid. Replace Eclipse Ego solenoid.
LPR is supercharging causing
intermittent leaking.
Clean LPR Piston seal.
Inspect regulator seal (in LPR piston)
and regulator seat (in LPR body).
Replace if necessary.
Check for damaged or incorrect seals on
Rammer.
Replace seals.
Is it leaking from the barbs? Check hose for cuts or replace barbs.
Fault Finding
Fault Finding
54
55

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Eclipse EGO and is the answer not in the manual?

Eclipse EGO Specifications

General IconGeneral
Air SourceHPA (High Pressure Air)
Body MaterialAluminum
ManufacturerPlanet Eclipse
TypeElectronic
Bore Size0.689 inches
Barrel Length14 inches
Battery9V
Grip MaterialRubber
Color OptionsVarious

Related product manuals