ecodyst Hydrogen - Ecochyll X3; Summary

To Next Page

To Previous Page

Accelerating the path to discovery

EcoChyll X3

Engineered for high-speed solvent evaporation and recovery in small- to medium-sized laboratories, the

EcoChyll

X3 is a robust cooling system for chemical, botanical, and other extractions. Using the pioneering

EcoChyll

direct cooling technology, the X3 bridges the gap between small-footprint, benchtop rotary

evaporators and our larger, higher-capacity EcoChyll evaporators. With a true 12 L capacity and compact form

factor, it holds more solvent than a “20 L” rotary evaporator while having a faster evaporation rate and much

shorter total run time.

The EcoChyll

X3 is routinely used downstream of botanical extractions via BHO, CO2, or ethanol. With twin

metallic condenser coils, the EcoChyll

X3 carries out continuous direct-cooling of incoming vapors in an

ecient and environmentally-friendly manner. No glycol or other coolant is necessary, start-up times are far

shorter, and total energy usage is less than half. EcoChyll

evaporators also free up operator time due to low-

intervention requirements. Because the evaporation ask is stirred rather than rotating, residual product can

simply be drained from a valve. The EcoChyll X3 can also be set up for more complete process automation,

saving time and money without compromising the quality of your results.

Summary

Overview

Available sizes: 12L, 20L