1
Accelerating the path to discovery
®
General Safety Instructions
The device has been constructed according to state-of-the-art technology and recognized safety regulations.
However, risks may still arise during installation, operation and maintenance.
Please ensure the operating manual is available at all times.
The device may only be used under the following circumstances
• Only operate the device, if it is in full working order.
• Ensure all operators of the device possess the necessary safety and risk awareness.
• Operate the device according to the instructions stipulated in this manual only.
• If there is something you do not understand, or certain information is missing, ask your manager or contact the
manufacturer.
• Do not do anything on the device without authorization.
• Only use the device according to its intended use.
General Safety Instructions
The device is intended for use by trained and authorized personnel only. The device is suitable for the following
• Economical cooling as alternative to tap water systems use.
• Research application.
Intended Use
Any use which deviates from the device’s intended use is considered to be improper. The manufacturer does not
accept liability for any damages resulting from non-permitted uses. The risk is carried by the operator alone.
Improper Use
• The device may only be connected when the main voltage corresponds to the information on the type plate of
the unit.
• The main connection must be accessible at all times.
• Repairs may only be performed by a qualied electrician.
• Never operate the unit with a damaged power cord.
• Always turn the unit OFF and disconnect main power before performing any maintenance or service.
Installation/Electrical Safety
To Next Page
Loading...