ecodyst Hydrogen - Safety During Use; Disposal

To Next Page

To Previous Page

Accelerating the path to discovery

Safety for the Personnel

Ensure that only qualied personnel operate the device. Observe the following regulations:

• Laboratory guidelines

• Accident prevention regulation

• Ordinance on Hazardous Substances

• Other generally accepted rules of safety engineering and occupational health

• Local regulations

• Wear the appropriate protective clothing when working on the device (clothing, protective glasses and if

necessary, safety gloves).

• Do not use the device in potentially explosive areas. The device is not protected against explosion. There is no

explosion or ATEX protection available.

• Do not operate or assemble devices in the vicinity which are emission or radiation sources (electromagnetic

waves) for the frequency range (3×1011 Hz to 3×1015 Hz).

• Avoid putting pressure on the display when you do not operate the device.

• Eliminate errors immediately.

• Do not use abrasive material to clean the glass surfaces. Only wipe with damp cloths.

• Always switch the device o after use.

Safety During Use

• Check the device components for hazardous substances and solvents.

• Clean all components before disposal.

• Dispose of the device according to the valid national legal regulations.

• Dispose of the packaging material in accordance with the valid national legal regulations.

• Have refrigerant emptied before disposal

Disposal

General Safety Instructions