ecodyst Hydrogen - Page 67

61 Accelerating the path to discovery
®
10.
Press the

key once and the word “int.t” will appear in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key
press the

key until the value “10” appears in the display. Let go of all the keys.
11.
Press the

key once and the word “dEr.t” will appear in the display.
Next, hold in the ‘*’ key, then while holding in the ‘*’ key press the

key until the value “50” appears in the display. Let go of all
the keys.
12.
Press the

key once and the word “dAC” will appear in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key
press the

key until the value “3.0” appears in the display. Let go of all the keys.
13.
Press the

key once and the word “CyC.t” will appear in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key
press the

key until the value “30” appears in the display. Let go of all the keys.
14.
Press the

key until the word “SPrn” appears in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key press the

or

key until the word “OFF” is displayed. Let go of all the keys.
15.
Press the

key until the word “LEVL” appears in the display.
16.
First hold in the ‘*’ key, then while holding in the ‘*’ key press the

key until “2” appears in the display. Let go of all the keys.
17.
Press the

key until “SP2.A” appears in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key press the

key
until the word “Dvhi” appears in the display. Let go of all the keys.
18.
Press the

key until “diSP” appears in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key press the

or

key until the value “0.1o” appears in the display. Let go of all the keys.
19.
Press the

key until “Lo.SC” appears in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key hold in the

key
until the number in the display stops changing (this will be “0” or “-50” or “-199.9” depending on thermocouple type). Let go of
all the keys.
20.
Press the

key until the word “LEVL” appears in the display.
21.
First hold in the ‘*’ key, then while holding in the ‘*’ key press the

key until “3” appears in the display. Let go of all the keys.
22.
Press the

key until “SPAn” appears in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key press the

or

key until the value ________________ appears in the display. Let go of all the keys.
23.
Press the

key until “ZEro” appears in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key press the

or

key until the value ________________ appears in the display. Let go of all the keys.
24.
Press the

key until the word “LEVL” appears in the display.
25.
First hold in the ‘*’ key, then while holding in the ‘*’ key press the

key until “1” appears in the display. Let go of all
the keys.
26.
Press the

key until “SEt.2” appears in the display. Next, hold in the ‘*’ key, then while holding in the ‘*’ key press the

or

keys until the value 10.0 is entered.
27.
Press and hold in both the

and

keys until the temperature appears in the display, then release both keys. The word
“PArk” in the display will go away when a set point is entered.
High Powered Heating Mantle Controllers