EcoFlow PowerStream Microinverter - Connecting Several Solar Panels in Series or in Parallel

|12
It is highly recommended to install the protective case on the top of the microinverter to protect
you from high temperature burns. The protective case is in the box.
Solar panels in series
Connecting several solar panels in series or in parallel
• If you connect several solar panels in series or in parallel as a group, make sure that the
maximum operating voltage (Vm) and maximum operating current (Im) of each group do not
exceed the maximum input voltage (55V) and maximum output current (13A) of the
microinverter PV input.
• The maximum operating voltage (Vm) and maximum operating current (Im) of solar panels
must to be consistent respectively.
×1
C
×4
K
×4
L
BKW-Solar cable Extension cable Super at cable
• If you use the EcoFlow 2kWh LFP Battery, please update the rmware of
PowerStream and the battery after turning it on. The update package of the
battery is included in that of PowerStream.
How to update: Download the EcoFlow app and connect with the microinverter,
then On the page of your PowerStream system in the app, tap Settings >
Firmware > Update.