EasyManua.ls Logo

EcoFlow PowerStream Microinverter - Page 29

EcoFlow PowerStream Microinverter
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
|26
128 (Displayed in app) Grid error
1. Try pulling out the AC cable and inserting it back
again. Make sure that the plug is securely inserted.
2. If the issue persists, the power grid is probably
faulty. Wait for the power grid to recover.
3. If the issue persists for more than 1 hour, contact
customer service.
256 Red Device error
1. Unplug all cables connected to the PowerStream.
2. Wait for 30 seconds, and then plug in all the cables.
3. If the issue persists, contact customer service.
512 Red Device error
1. Unplug all cables connected to the PowerStream.
2. Wait for 30 seconds, and then plug in all the cables.
3. If the issue persists, contact customer service.
1024 Red Device error
1. Unplug all cables connected to the PowerStream.
2. Wait for 30 seconds, and then plug in all the cables.
3. If the issue persists, contact customer service.
4096 (Displayed in app)
Disconnected
from grid
1. Try pulling out the AC cable and inserting it back
again. Make sure that the plug is securely inserted.
2. If the issue persists, the power grid is probably
faulty. Wait for the power grid to recover.
3. If the issue persists for more than 1 hour, contact
customer service.
16384 Red Device error
1. Unplug all cables connected to the PowerStream.
2. Wait for 30 seconds, and then plug in all the cables.
3. If the issue persists, contact customer service.
4 Yellow
Incorrect wiring of
the solar panel
Make sure the solar panel is correctly wired. If the
issue persists, contact customer service.
8 Yellow
Incorrect wiring of
the solar panel
Make sure the solar panel is correctly wired. If the
issue persists, contact customer service.
16 Yellow
Device
temperature too
high
Keep the ambient temperature within the range of -40
°C to 50 °C. If the issue persists, contact customer
service.
32 Yellow
Temperature too
low
Keep the ambient temperature within the range of -40
°C to 50 °C. If the issue persists, contact customer
service.
64 Red
Overvoltage at
the solar panel
Check if the open-circuit voltage of the solar panel is
between 11V and 55V.
16 Yellow
Temperature too
high
Keep the ambient temperature within the range of -40
°C to 50 °C. If the issue persists, contact customer
service.

Related product manuals