Ecolab 10240138 - Page 104

Dermados Station: 500 and 1000 ml cylinders
The variants for using 500 and 1000 ml bottles differ in the size of the
dispenser. The 500 ml bottle can therefore not be used in the dispenser of
the 1000 ml version (article no. 10240167), nor can the 1000 ml in the
500 ml version (article no. 10240166).
1
2
3
1
4
4
5
5
Insert disinfectant bottle
1.
Open dosing dispenser with key (
Ä Chapter 3 ‘Scope of delivery’ on page 17).
2. Remove the cap from the 500 or 1000 ml bottle (pos. 4).
3. Insert filled bottle. To do this, guide the bottle over the suction hose from below and
ensure that the hose hangs centrally in the bottle and is not kinked.
4. Place the bottle neck over the guide spigot
(on the underside of the sensor carrier plate).
5. Place the bottle on the bottle stop (pos. 5).
6. Remove the key.
7. Close dosing dispenser.
Installation and assembly
24MAN048961, Rev. 2-09.2020