To Next Page
A
Alicia HillAug 1, 2025
What to do if Ecolab Chameleon SP Measuring Instruments foam quality is unsatisfactory?
- MMaria MillerAug 1, 2025
If you're experiencing unsatisfactory foam quality with your Ecolab Measuring Instruments, consider these potential causes and solutions: * Ensure a 50/200 foam nozzle is fitted. * Adjust the air supply using the air regulator. * Regulate the detergent/disinfectant supply via the dosage valve. * Confirm the switch is set to the foam position. * Open the dosage valve. * Open the shut-off valve for air to connect the air supply. * Check and clean or replace the filter in the hose from the detergent/disinfectant container if it's clogged. * Ensure there is sufficient detergent/disinfectant in the container.
General
