Ecolab Elados EMP III-E00 - Pump Setup and Electronic Versions

5.2 Setup
Fig. 2: Structure EMP III
1 Diaphragm breakage sequence
2 Suction valve (connection on the suction side)
3 Pump head
4 Pressure valve (connection on the pressure side)
Flow direction of the metering medium
5.2.1 Electronic version
Fig. 3: Electrical version EMP III
1 Control knob for stroke length
2 on/off switch
3 green LED (ready for use)
Equipmentg Function
(only E00)
T
erminal box on motor
Continual operation without ON/OFF switch, without operation lamp
(E00/E10)
Mechanical stroke adjustment
Metering capacity setting
(only E10)
On/of
f switch
Continual operation (max. stroke frequency)
(only E00)
Green LED
Pump ready for operation
Assembly, mounting and installation
27 417102233 Rev. 3-03.2019