5.3 Mounting diagram
Personnel:
n
Mechanic
n
Qualified electrician
n
Service personnel
n
Specialist
5.3.1 Einbauschema
Mounting diagram
1 Overflow valve
2 Pressure control valve
3 Replacement method: Multifunction valve
4 Suction pipe / bottom admission valve
The metering valve, pressure control valve and pressure relief valve can be
replaced by a multifunction valve (MFV) from our product range, which
combines all of these functionalities.
5.4 Device installation
5.4.1
Hydraulic installation
Personnel:
n
Mechanic
n
Service personnel
n
Specialist
CAUTION!
The installation must only be performed by authorized personnel and the
general guidelines and local installation regulations must be observed!
Specific measures and protection devices for the metering of dangerous or
aggressive chemicals are not provided here.
When using such chemicals, always observe the legal regulations and the
relevant product datasheet.
The venting pipe must never be fed back into the suction line of the metering
pump!
Assembly, mounting and installation
28417102233 Rev. 3-03.2019
To Next Page
Loading...
