Econ 3300 Series - View Mode (VIEW)



  
Installation and Operating manual
Econ
®
Series 3300 Smart Valve Positioner www.eriks.com
Rev. 3 – January 22, 2019
31
6.3.5.9 Interpolation Mode (ITP OFF / ON)
Positioner can control the valve accurately if the feedback lever angle range is within designed range.
For some instance, the angle exceeds the suggested range angle. Positioner can reduce the error
through interpolation.
6.3.6 View Mode (VIEW)
Different information can be shown on the positioner’s LCD.
Description
3300
Positioner model
VERSION
Main software version
HART V
HART
®
protocol version
POL AddR
HART
®
protocol channel address
bIAS 25
BIAS value when valve position is at 25%
bIAS 75
BIAS value when valve position is at 75%
0Y 0d
Total used time duration. If a unit was used less than 1 minute, the
time will not accumulate.
FULL_OP
Time elapsed for valve to fully open
FULL_CL
Time elapsed for valve to fully close.
VM NOR
Type of valve stroke on LCD. (in percentage or in value)
⇨
<ENTER>
⇨
<DOWN>
8 times
⇨
<ENTER>
⇨
<UP>/<DOWN>
⇨
<ESC>
3 times
<ENTER>
⇨
<DOWN>
4 times
⇨
<ENTER>
<UP>/<DOWN>
<ESC>