Ecosoft FPA Series User Manual

INSTRUCTION MANUAL ECOSOFT
®
MEDIA SYSTEMS
10
2. Set current time by pressing CLOCK.
3.2. WS1DV control valve setup
1. Set time of day.
From the Time of Day display, press and hold NEXT until the SET
indicator and the hour ash
Use UP or DOWN to set the hour. Press NEXT to go to the next
display.
Use UP or DOWN to set the minutes. Press NEXT to return to
user level displays.
2. OEM installer settings.
STEP 1I – From normal mode, press UP and NEXT simultaneously
for about 3 seconds and release.
STEP 2I – Inlet Water Hardness (PPM) - Set the amount of in uent
hardness using UP or DOWN. Press NEXT to go to Step 3I. Press
REGEN to exit OEM Installer Settings.
This screen will only be displayed when “rES” is selected in step 3S.

Ecosoft FPA Series Specifications

General

Brand	Ecosoft
Model	FPA Series
Category	Water Filtration Systems
Language	English