Ecosoft ROBUST 1000 Installer And User Guide

40 41
This manual is the intellectual property of Ecoso. Copying and reprinng is prohibited. © 2016
INSTALLER AND USER GUIDE FOR REVERSE OSMOSIS SYSTEM ECOSOFT ROBUST 1000, ROBUST 3000
11 Install carbon post-lter.
12 Install all membranes in membrane housings.
CAUTION! When installing reverse osmosis mem-
brane, do not take it out of the bag. Cut the bag at
the opposite end to membrane’s brine seal, push the
membrane inside membrane housing. Do not touch
membrane surface at any me.
13 Open feed valve and puried water faucet for 30 minutes to rinse membranes and other
parts of the system. Do not open tank valve at this me. Close the puried water faucet and
check all connecons for leaks.
CAUTION!

main valve to remove water supply to the system.
14 Open tank valve and let the system ll it. The system will switch o when the tank is full.
Open puried water faucet and discard the rst tankful of puried water. When the tank is
drained empty, close the puried water faucet and let the system rell the tank. The water
can be used now.
* Skip steps 6 and 14 if installing a tankless system.
A
A (1 : 1)
A
A (1 : 1)

Ecosoft ROBUST 1000 Specifications

General

Brand	Ecosoft
Model	ROBUST 1000
Category	Water Dispenser
Language	English