ECOVACS DEEBOT DN78 - Quick Start

8
EN EN
3. Operating and Programming
3.2 Quick Start
*
Remove the Bumper Rail protection
sponges on both sides of the DEEBOT
before the rst use.
Place the Charging Dock on a level floor
surface against the wall with the base
perpendicular to the ground. Keep the
immediate area 1.5m (5') in front of the charger
and 0.5m (1.6') on both sides of the charger
clear of objects and reective object surfaces.
Plug the Charging Dock in.
Attach Side Brushes to the bottom of
DEEBOT by pressing a brush into each slot
with the matching color until it clicks.
Charging Dock Placement
1
Install Side Brushes
2