ECOVACS DEEBOT N78D - Page 14

12
EN EN
Place DEEBOT on the Charging Dock
making sure the Charging Contacts on
DEEBOT and the Charging Dock Pins make
a connection.
Charge DEEBOT for at least 4 hours before
rst use.
Charge DEEBOT
4
*
*
*
Make sure to turn the robot’s Bottom Power Switch to the ON position before charging.
(“I”=power ON; “O”=power OFF. The robot’s default setting is “O”.) DEEBOT is powered ON
when the AUTO Mode Button glows a continuous BLUE.
AUTO Mode Button blinks when DEEBOT is charging. AUTO Mode Button stops glowing
when DEEBOT is fully charged.
Remove the Water Reservoir before charging DEEBOT.
3. Operating and Programming
Press the AUTO Mode Button on DEEBOT or on the Remote Control. DEEBOT starts to work
immediately in AUTO Cleaning Mode.
Start
5
*
To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details.