21
EN EN
4. Maintenance
If the mopping system was used, remove the
Water Reservoir from the bottom of DEEBOT.
Empty any remaining water from the Reservoir,
and set out to dry.
Wipe the Suction Intake with a dry cloth. Remove any hair or debris tangled around the
Side Brushes with the provided Multi-Function
Cleaning Tool. Remove the Side Brushes and
wipe the Side Brushes and their slots with a
clean cloth.
Wipe the outside of the Water Reservoir with a
dry cloth.
Cleaning the Water Reservoir
Cleaning Suction Intake Cleaning the Side Brushes
4.3 Suction Intake and Side Brushes
*
A Multi-Function Cleaning Tool is provided for easy maintenance. Handle with care, this
cleaning tool has sharp edges.
To Next Page