EN∣29
Time Scheduling function is cancelled.
The Robot is out of power.
NO. Issues Possible Causes Solutions
Take out the 2 in 1 Module, and clean the Dust Box outlet. 13
14
15
16
17
Dust leakage occurs
during working.
Driving wheels are blocked.
Robot reservoir drops out of
place during use.
Robot does not perform
Continuous Cleaning.
Robot does not clean
automatically at the
scheduled time.
Driving wheels are blocked by
foreign objects.
The outlet of Dust Box is blocked.
The reservoir is not correctly installed. Make sure Robot reservoir clicks into place when
installing.
Please rotate and press the driving wheels to check
whether there is any foreign object wrapped or stuck.
If there is any foreign object, please clean it in time.
If this problem persists, please contact Customer Care
for help.
In Do Not Disturb mode, Robot does not perform
Continuous Cleaning.
Reset appointment.
Charge the Robot.
The Robot is in Do Not Disturb mode.
In Do Not Disturb mode, Robot does not perform
scheduled cleaning.
Continuous Cleaning is not performed when you manully
recharge Robot or move it to Auto-Empty Station.
The Robot is in Do Not Disturb mode.
The Robot did not automatically return to
the Auto-Empty Station last time.
If you cannot solve the issues by following the above instructions, please contact after-sales service.
To Next Page
Loading...
