Before performing cleaning and maintenance on WINBOT, Power OFF and unplug WINBOT from
the receptacle.
4.1 Cleaning Pad
4.2 Fan, Sensors and Squeegee
Turn WINBOT over and remove the Cleaning
Pad. Soak the Cleaning Pad in cool, clean
water for 2 minutes. Hand wash with mild
detergent and lay flat to dry. Allow it to dry
completely before re-attaching it to WINBOT.
Fan Side Rollers
Turn WINBOT over and wipe any debris from
the Fan with the provided Finishing Cloth to
maintain suction.
Wipe the four Side Rollers with the provided
Finishing Cloth to maintain their eectiveness.
4. Maintenance
*
Do NOT use a wet Cleaning Pad on WINBOT or it may slip on the window.
*
Washing the Cleaning Pad regularly can extend its service life.
*
If the Cleaning Pad becomes worn or no longer fits exactly within the Velcro area, replace it with a
new one to achieve best cleaning performance.
To Next Page
Loading...
