3.6 Spray Cleaning Solution
Spray the each side of the Cleaning Pad with
the provided WINBOT Cleaning Solution 8
times.
After spraying, wipe the bottom of WINBOT
with the provided Finishing Cloth.
3. Operating WINBOT
3.7 Start
Plug in WINBOT
1
*
It is recommended to use WINBOT with WINBOT Cleaning Solution from ECOVACS. Using
tap water or other cleaners could have an adverse effect on cleaning performance. Using other
cleaning solutions could potentially nullify the warranty.
*
Do not unplug WINBOT while it is cleaning.
To Next Page
Loading...
