13
ECOWATER
SYST E MS
Faceplate Controller, Features/Options
Primary Menu, continued
Water Flow Rate: Enter Primary Menu. Press the (↑)or(↓) keypads until
cursor is next to Water Flow Rate. Press the SELECT/EXIT (↵ ) keypad.
When selected, this screen will show the water flow rate in gallons per min-
ute (GPM) or liters per minute (LPM) with the moving bar graph at the bot-
tom of the display.
Water Used Today: Enter Primary Menu. Press the (↑)or(↓) keypads until
cursor is next to Water Used Today. Press the SELECT/EXIT ( ↵ ) keypad
and the gallons/liters used since midnight will be shown in the display.
Average Water Use: Enter Primary Menu. Press the (↑)or(↓) keypads until
cursor is next to Average Water Use. Press the SELECT/EXIT ( ↵ ) keypad
and the average gallons/liters use each day will be shown in the display.
Soft W ater Meter: Enter Primary Menu. Press the (↑)or(↓) keypads until
cursor is next to Soft Water Meter. Press the SELECT/EXIT (↵) keypad.
This screen is similar to a trip odometer in that it will count the number of
gallons/liters through the system until it is reset. To reset back to zero press
the (↓) keypad.
Set Rolling Screen: Enter Primary Menu. Press the (↑)or(↓) keypads until
cursor is next to Set Rolling Screen. Press the SELECT/EXIT (↵) keypad.
This menu will disable the Normal Screen Views from scrolling and will show
only the screen that is most current.
Set 12/24 Hour Clock: Enter Primary Menu. Press the (↑)or(↓) keypads
until cursor is next to Set 12/24 Hour Clock. Press the SELECT/EXIT (↵ )
keypad. Moving the (↑)or(↓) keypads will change clock display from 12
hour (AM & PM) or 24 hour format.
Set Gallons/Liters: Enter Primary Menu. Press the (↑)or(↓) keypads until
cursor is next to Set Gallons/Liters. Press the SELECT/EXIT (↵) keypad.
Moving the (↑)or(↓) keypads will change displays to indicate water in gal-
lons or liters.
Set Grains/PPM: Enter Primary Menu. Press the (↑)or(↓) keypads until
cursor is next to Set Grains/PPM. Press the SELECT/EXIT (↵) keypad.
Change between diplaying hardness units in grains or parts per million
(PPM).
continued
To Next Page