5. Sensor Placement
The best mounting location for the indoor
sensor is in a location that never receives
direct sunlight, not even through windows.
Also, do not install in a location where a
nearby radiant heat source (radiator,
heaters, etc.) will affect it. Direct sunlight
and radiant heat sources will result in
inaccurate temperature readings.
The unit is weatherproof, but besides
heeding the placement instructions above,
you should also attempt to mount the unit
under cover (eve or awning or similar).
To mount or hang the unit on a wall or
wood beam:
Use a screw or nail to affix the remote
sensor to the wall, as shown on the left
side of figure 5, or
To Next Page
Loading...
