28
Using BIOS
Standard CMOS Features
This option displays basic information about your system.
Date and Time
The Date and Time items show the current date and time on the computer. If
you are running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
fIDE Devices (None)
Your computer has two IDE channels (Primary and Secondary) and each channel can be
installed with one or two devices (Master and Slave). In addition, this motherboard supports
two SATA channels (Primary and Secondary) and each channel allows one SATA device to
be installed. Use these items to configure each device on the IDE channel.
Press <Enter> to display the IDE submenu:
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Phoenix-AwardBIOS CMOS Setup Utility
IDE Channel 0 Master
IDE HDD Auto-Detection
Press <Enter> while this item is highlighted to prompt the Setup Utility to automatically
detect and configure an IDE device on the IDE channel.
mnlk
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Date (mm:dd:yy) Mon, Mar 1 1999
Time (hh:mm:ss) 11 : 11 : 20
f
IDE Channel 0 Master
f
f
f
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
Drive A [1.44M, 3.5 in.]
Floppy 3 Mode Support [Disabled]
Video [EGA/VGA]
Halt On [All Errors]
Base Memory 640K
Extended Memory 65535K
Total Memory 21024K
Change the day, month,
year and century.
mnlk
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Item Help
Menu Level
f
Phoenix-AwardBIOS CMOS Setup Utility
Standard CMOS Features
IDE HDD Auto-Detection [ Press Enter]
IDE Channel 0 Master [Auto]
Access Mode [Auto]
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
Menu Level
f
To auto-detect the HDD’s
size, head...on this chan-
nel
f
Item Help
To Next Page
Loading...
Need help?
General
