30
Using BIOS
Advanced BIOS Features
This option defines advanced information about your system.
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
mnlk
Thermal Management (Thermal Monitor 2)
This item displays CPU’s temperature and enables you to set a safe temperature to
Prescott CPU.
CPU Feature (Press Enter)
Users please note that this function is only available for Prescott CPUs. Scroll to this item
and press <Enter> to view the following screen:
f
Phoenix-AwardBIOS CMOS Setup Utility
CPU Feature
Delay Prior to thermal [16 Min]
Thermal Management [Thermal Monitor 2]
TM2 Bus Ratio [0 X]
TM2 Bus VID [0.8375V]
Limit CPUID MaxVal [Disabled]
C1E Support [Enabled]
Execute Disabled Bit [Disabled]
Vanderpool Technology [Enabled]
Intel (R) SpeedStep (tm) Tech. [Enabled]
Item Help
Menu Level
ff
Delay Prior to Thermal (16 Min)
This item enables you to set the delay time before the CPU enters auto thermal mode.
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
mnlk
F5:Previous Values F6”Fail-Safe Defaults F7:Optimized
X
X
CPU Feature [Press Enter]
Hard Disk Boot Priority [Press Enter]
CPU L3 Cache [Enabled]
Hyper-Threading Technology [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Floppy]
Second Boot Device [Hard Disk]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Gate A20 Option [Fast]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec ) 6
Typematic Delay (Msec) 250
Security Option [Setup]
APIC Mode [Enabled]
OS Select For DRAM > 64MB [Non-OS2]
HDD S.M.A.R.T. Capability [Disabled]
f
f
2
2
Item Help
Menu Level
f
f
f