31
Using BIOS
Limit CPUID MaxVal (Disabled)
This item can support Prescott CPUs for old OS. Users please note that under NT 4.0,
it must be set “Enabled”, while under WinXP, it must be set “Disabled”.
Execute Disabled Bit (Disabled)
Users please leave this item in its default setting under Windows XP OS. Change the value
to “Disabled” if users are to install Linux OS.
TM2 Bus Ratio (0 X)
This item helps you to set the frequency (bus ratio) of the throttled performance that will
be initiated when the on-die sensor goes from not hot to hot. You may set the bus ratio
number from 0-255. This feature is available when CPU supports Thermal Monitor 2.
TM2 Bus VID (0.8375V)
This item helps you to set the voltage of the throttled performance that will be initiated
when the on-die sensor goes from not hot to hot. This feature is available when CPU
supports Thermal Monitor 2.
C1E Support (Enabled)
This item enables or disables the CPU C1E function.
Vanderpool Technology (Enabled)
This item enables or disables the Vanderpool Technology. When disabled, forcess the VT
function will close.
Intel (R) SpeedStep (tm) Tech. (Enabled)
This item enables or disables the Intel (R) SpeedStep (tm) technology. When enabled,
allows enhance Intel SpeedStep Technology transitions.
Press <Esc> to return to the AwardBIOS CMOS Setup Utility page.
To Next Page
Loading...
Need help?
General
