40
Using BIOS
ECP Mode Use DMA (3)
When the onboard parallel port is set tp ECP mode, the parallel port can use DMA3 or
DMA1.
Power On After Power Fail (Off)
This item enables your computer to automatically restart or return to its last operating
status after power returns from a power failure.
SPP allows data output only. Extended Capabilities Port (ECP) and Enhanced Parallel Port
(EPP) are bi-directional modes, allowing both data input and output. ECP and EPP modes
are only supported with EPP- and ECP-aware peripherals.
Press <Esc> to return to the AwardBIOS CMOS Setup Utility page.
To Next Page
Loading...
Need help?
General
