16
Installing the Motherboard
1. When the driver of onboard VGA is installed first, the primary Graphics in
Windows will be onboard VGA. However, if the driver of add-on PCI Express
Graphics card is installed first, the primary Graphics in Windows will be add-on
PCI Express Graphics card.
2. If you install the add-on PCI Express VGA card, BIOS setup will automatically
disable the onboard VGA after loading optimal defauts. To enable the Surround
Display function, make sure to manually enable onboard VGA in the BIOS setting.
3. When using surround display, please make sure that “Init Display First” in
“CMOS Setup Utility” should be selected to “Onboard VGA”.
Function
Init Display
First
Onboard
PCI-E
x4
Test
Result
PCI-E Card o
x pass
PCI-E Card x
o pass
PCI-E Card o
o pass
Install WinXP
OnBoard VGA o
o pass
Surround Display
4. This motherboard can’t support Add 2 card.
To Next Page
Loading...
Need help?
General
