ECS B75H2-M4 - Connecting Case Components

Chapter 2
22
B75H2-M4 USER MANUAL
1 & 6. ATX_POWER (ATX 24-pin Power Connector) & ATX12V (ATX12V Power
Connector)
Connect the standard power supply connector to ATX_POWER.
Connect the auxiliary case power supply connector to ATX12V.
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
2-4-7. Connecting Case Components
No. Components No. Components
1ATX_POWER4 CPU_FAN
2 F_PANEL 5 SYS_FAN
3 SPK 6 ATX12V