B75H2-M4 USER MANUAL
49
Chapter 3
B.O.M.P Technology (Enabled)
This item allows users to enable or disable B.O.M.P technology. This function can run
safe setting to setup menu when system boot fail 3 times.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
This is display-only field and displays the information of the CPU installed in your
computer.
Processor Speed (3400 MHz)
This item shows the CPU speed.
Memory Frequency (1333 MHz)
This item shows the memory frequency.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Total Memory (2048 MB (DDR3))
This item shows the total memory of DDR3.
This item controls the four bank activate time in memory clock cycles.
Four Active Window Delay (tFAW) (20)
Press <Esc> to return to the M.I.B III menu page.
Read CAS# Precharge (tRTP) (5)
This item controls the Read to PRECHARGE delay for memory devices, in memory
clock cycles.
To Next Page
Loading...
Need help?
General
