ECS GF8100VM-M5 User Manual

34
Using BIOS
Press <Esc> to return to the main menu setting page.
DRAM Frequency
DRAM Timing Mode
This item allows you to enable or disable the DRAM timing defined by the Serial
Presence Detect electrical. Users please note that if setting this item to auto, the
following two items are not available.
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
Hybrid SLI Support
This item allows users to enable or disable the NVIDIA
®
Hybrid SLI technology.
Share Memory Auto Detection
Disable this item to set the Share Memory Size. And if the item is set to Auto, Share
Memory Size can be controlled according to the dram size. When the dram size is
less than 1 GB, Share Memory Size should be set to 64 MB. While between 1 GB and
2 GB, it should be set to 128 MB. When more than 2 GB, it should be set to 256
MB.
Share Memory Size
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
Memory Remap Feature
This
item allows you to remap the overlapped PCI memory above the total
physical memory if you have a 64 bit OS and 4 GB of RAM.
(This item only support AM2+)
DCT Unganged Mode
This item is used to select the DCT mode (DRAM Controller mode).

ECS GF8100VM-M5 Specifications

General

Number of memory slots	2
Maximum internal memory	16 GB
Processor socket	Socket AM2
Processor manufacturer	AMD
USB 2.0 connectors	4
Power fan connector	Yes
Number of SATA connectors	6
Controller interface type	NVIDIA MCP78V
PS/2 ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports	0
Audio chip	VIA VT1708B
Power source type	ATX
Audio output channels	6.1 channels
Motherboard form factor	micro ATX
BIOS type	AMI
Maximum graphics card memory	512 MB
RAID levels	0, 1